For some people how to assemble computer is considered as difficult.
and of course it's true,for who does not know how to assemble a computer.
but for those who know how to build computer,it is easy.
you can building your own computer,according to what you want.
knowledge and ability assembled computer this is an important science but we are required to have at least basic knowledge of computers.
also know computer components and computer hardware.
Now, I will share knowledge and how to build your computer
immediately,I will explain how to build a computer step by step.






1.Prepare assemble computer parts and computer components we will raft and tools needed to assemble a desktop computer



-motherboard Manual Book

  - motherboard

  - Processor

  - Thermal paste

  - Heatsink

  - hardisk

  - Ram

  - Vga

  - Sound card

  - Dvd rom drive

  - casing

  - Data cable ide / sata

  -screwdriver

  -anti-static bracelet

  - Power Suply

  - lan card

  - floppy


2.first,we take the screwdriver and the casing is also a buffer (bracket) motherboard

Open the side casing cap screws with a screwdriver.
after it is open, grab the buffer(bracket) motherboard and plug in the hole to place the motherboard.


3.second, wear an antistatic bracelet, prepare the motherboard, processor, thermal paste, heatsing.

Now we will install the processor on the motherboard.Processor is more easily installed before the motherboard is installed in the casing.
make sure your hands dry and not sweat.and wear anti static bracelet.
then take the motherboard and go to a place protective covering processor.
then open the protective processor cover lock, lift the lever upwards.
if it is finished, we take the processor to put in its place.

attention ...in installing the processor we must be careful because the processor has a very small pin.
also set it up wrong or should not be reversed.

-Determine the position of pin 1 on the processor and the processor socket on the motherboard,generally located at the corner marked with a dot,triangle or curve.
-Enforce the position of the locking lever to open the socket.
-Insert the processor into the socket by first aligning the position of the legs of the processor with the socket holes.queeze until there are no gaps between the processor with the socket.
-Lower the locking lever back.

if completed,apply thermal paste on the surface of the processor.
Apply thinly and evenly.Do not overdo the use of thermal paste.

- next, install the heatsink on the processor heatsink by inserting the lock into its place.

gently press but with strong,heatsing to be installed correctly.

Function of heatsink is to remove the heat generated by the processor through the conduction of heat from the processor to the heatsink.
To optimize the heat transfer of the heatsink should be fitted tightly on the top of the processor with some of the retaining clip on the heatsink while the contact surface coated with the gene of heat.
If the heatsink is equipped with a fan then the fan power connector is connected to the fan connectors on the motherboard.

-Now the processor is mounted on the motherboard.


4.Now we will install the ram/memori module.

5.Next we will install motherboard

-Determine the mounting position of the hole for each plastic and metal.Holes for the metal holder (metal spacers) characterized by a ring on the edge of the hole.
-Holder, Attach metal or plastic casing on the tray in accordance with the position of each corresponding mounting holes on the motherboard.
--Place the motherboard on the tray so that the head casing holder out of the holes on the motherboard.
-Attach a frame-port I / O (I / O sheild) on the motherboard if any.
-Replace the casing tray that is mounted on the chassis and motherboard with a screw lock.

6.Next we will install power suply

-Insert the power supply on the shelf at the back of the casing.Attach all four pieces of the locking screw.
-Connect the power connector from the power supply to the motherboard.ATX power connector types have only one way of installation so as not to be reversed.

7.Installing the Motherboard Cables and Casing

Check the motherboard diagram to locate the proper connector.

*When the difficulty,read the motherboard manual

8.Install the VGA card in the slot vga card built onto the motherboard

installation vga card is a must,if your motherboard has no onboard vga.



9.Install sound card onto pci slot

installation sound card is a must,if your motherboard has no onboard sound

10.Install lan card also modem card,if necessary

11.install Hardisk,floppy, DVD drive its same

-open the drive bay (for drive space on the casing)
-Connect the cable connector IDE / Sata to drive and the connector on the motherboard
-Connect the power cord from the power supply to each drive.

Completed our work in assembling the computer.

for the final stage,we must examine our computer assembly to ensure that the computer components that we install can work properly.

Now Turn on the monitor and press the power button on the Computer to run it.

Note the display monitor and the sound from the speakers.

if the screen displays the post bios,It means we work to assemble a computer as been successful






*Read the manual if difficulties in setting Bios

then you can install the Operating System you want.

if there is a problem,try to open the manual book and find out the type of fault.

My suggestion,to make this guide practice,ask your friend who is experienced in assembling a computer to assist you.
because of all the risks of wrong ways will be your responsibility.

I hope this computer assembly guide useful for you.
please develop your own and still learning it so you'll have a great ability how to build your own computer